Skip to content
  • Sign up for our newsletter and enjoy 10% off your first online order!
  • Free shipping on orders over €200 (incl. VAT) within mainland France.
  • Pay in 3 interest-free installments with Alma on orders of €200 or more in France and nearby European countries.

From the Paris workshop to the Limoges manufactory.

It all begins in our workshop, set in a courtyard of the Faubourg Saint-Antoine, Paris’s historic artisans’ quarter. Each of our pieces starts as a drawing, then is shaped on a plaster lathe. Once the form is just right, the patterns are engraved into it.

Our pieces are made by hand. A mold is made from the model and then sent to the manufactory in Limoges for approval. Once the prototype is approved, the Paris workshop makes the master mold, also called the case mold, which is then used to produce several working molds. Each of these molds has a limited lifespan, as it can only produce around forty pieces before it has to be remade.

In Limoges, the mold is closed and filled with liquid porcelain. The plaster absorbs the water, and once the desired thickness is reached, the mold is emptied, the piece is removed and left to dry. Porcelain remembers even the slightest knock: a piece handled carelessly before firing will warp in the kiln. Every step is therefore carried out with care, so that the intended form emerges intact. The pieces then go through a first firing at 980°C (1,796°F), called the bisque firing. They are glazed or left unglazed, then fired a second time at 1,400°C (2,552°F), the temperature at which porcelain reveals its translucency, its whiteness and its strength.