Installing your pendant light

• With a ceiling rose

Unfold and lower the domino cover over the wire, then insert the wire into the plastic tab. Insert the wires into the domino and hook the tab onto the hook. Replace the domino cover against the ceiling, then tighten the cable clamp screw to secure the domino cover and, if present, the side screws, screwing gently by hand to avoid breaking the porcelain.

• With a holed wall peg

Unfold and lower the hook onto the wire, then insert the wires. Reassemble the coat hook against the wall and screw the screws into the wall plugs, tightening gently by hand to avoid breaking the porcelain. Finally, wrap the wire around the coat hook, making several turns.

Installing your portable light

1. Position the peg against the wall and screw the screws into pegs, tightening gently by hand so as not to break the porcelain.
2. Wrap the wire around the peg, making a knot and several turns. Our favorite knot is the capstan knot, shown in this video.

Installing your wall lamp

1. Position sconce against electrical outlet and mark screw location.
2. Install the socket with its support, centering it at the bottom.
3. Screw the screws into the plugs, leaving them protruding.
4. Insert sconce over screws.