Install your pendant light

• With a ceiling rose
  
  Slide the connector cover onto the cable and pull it down, then pass the cable through the plastic tab. Insert the electrical wires into the terminal block and hang the tab onto the hook. Then raise the connector cover up to the ceiling and tighten the cable clamp screw to secure it. If present, also gently tighten the side screws by hand to avoid damaging the porcelain.
  
• With a wall peg for wall lamps
  
  Slide the mounting bracket onto the cable and insert the electrical wires into it. Raise the bracket against the wall and screw it into wall plugs, tightening gently by hand to avoid damaging the porcelain. Finally, wrap the cable around the bracket several times.

Install your portable lamp

1. Position the mounting bracket against the wall and screw it into wall plugs, tightening gently by hand to avoid damaging the porcelain.
2. Wrap the cable around the bracket, tying a knot and making several turns. Our preferred knot is the clove hitch, shown in this video.

Install your wall light

1. Position the wall light against the electrical outlet and mark the screw positions.
2. Install the socket with its holder, centering it at the bottom.
3. Screw the screws into the wall plugs, leaving them slightly protruding.
4. Place the wall light onto the screws.